4 in 1 stainless steel can coolers with 2 lids, plastic straw, and individual box. One lid is a screw-off lid with a rubber gasket for cans and the second lid is a spill-proof lid for fluids. This will keep drinks colder for much longer and prevent your drinks from going flat nearly as fast. Slim can cooler
*** This can cooler will fit most 12 oz beverages *** 12 oz skinny cans - Red Bull, Whiteclaws, Truly, Bud Light Seltzers, etc 12 oz regular can of soda, Dr. Pepper, Coke, Pepsi, Mt Dew, etc 12 oz glass bottles, though the glass bottles do have different shapes so may not be 100% tight but they will not fall out AND has a second lid that is a spill-proof topper to make it a regular cup, too. - PLUS - This cooler is shaped at the bottom and will fit in car cup holders
PRESSING INSTRUCTIONS and RECOMMENDATIONS - (these are only recommendations as each press and oven are different. You will need to see what will work best for your particular press or machine)
Sublimation can insulator 4 in 1
Size: H 6.1 x D 3.2 Inch
Capacity: 12 OZ /350 ML
For a CONSTANT temperature mug press:
Set the temperature of the press to 350 degrees F for 80-100 seconds with light-medium pressure.
For a VARIABLE temperature mug press:
Set the “idle” temperature to 315 degrees, the “print” temperature to 320 degrees, and the timer for 15 seconds. Adjust the pressure to light-medium.
For a convection oven:
Set your oven temperature to 360 to 375 degrees. Heat for 5-6 minutes.
